Yamaha Arius YDP-160 Manuel du propriétaire - Page 36
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha Arius YDP-160. Yamaha Arius YDP-160 44 pages. Yamaha digital piano user's manual
Également pour Yamaha Arius YDP-160 : Format des données Midi (6 pages), Manuel d'utilisation rapide (2 pages), Manuel du propriétaire (44 pages), Manuel (44 pages), (danois) Guide de l'utilisateur (44 pages)
Imprimer la page
Keyboard Stand Assembly
2.
Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may
be different from the other side. In this case, posi-
tion B so that the side of the surface color similar
to D and E faces the player.
2-1 Place the lower side of B on each foot of D
and E, then attach the upper side to D and
E.
2-2 Attach the top of B to D and E by finger-
tightening the thin screws 3 (4 × 12mm).
2-3 While pushing the lower part of D and E
from outside, secure the bottom ends of B
using two tapping screws 4 (4 × 20mm).
2-4 Insert the other two tapping screws 4 (4 ×
20mm) into the other two screw holes to
secure B.
2-5 Securely tighten the screws on the top of B
that were attached in Step 2-2.
2-1
Place the bot-
tom ends of the
rear panel on
each foot.
2-3
3.
Securely tighten the screws on C
that were attached in Step 1-3.
36
Owner's Manual
YDP-160/140
E
2-2, 2-5
B
2-4
2-3
B
C
3
4.
Mount A.
E
CAUTION
•
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
•
Do not hold the keyboard in any position other
than the position shown in the illustration.
5.
Secure A.
5-1 Adjust the position of A so that the left and
D
right ends of A will project beyond D and E
equally when seen from the front.
5-2 Secure A by tightening the short screws 2
(6 × 16mm) from the front.
Projection
of A
Be sure to place your hands at
least 10 cm from either end of the
main unit when positioning it.
A
At least
10 cm
D
B
5-1
A
5-2