Zanussi ZDT6453 Manuel d'instruction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Zanussi ZDT6453. Zanussi ZDT6453 19 pages.

Imprimer la page

Maintenance and cleaning

Clean the external surfaces of the machine and control panel

with a damp soft cloth. If necessary use only neutral

detergents. Never use abrasive products, scouring pads or

solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse

aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run a 65°C wash

programme without dishes using detergent.

Cleaning the filters

The filters in the base of the washing compartment are to a

large extent self-cleaning. Nevertheless the filters should be

checked and cleaned from time to time. Dirty filters will

degrade the washing result.

1. Open the door, remove the lower basket.

2. The dishwasher filter

system comprises a

coarse/fine filter (A/B), a

microfilter (C) and a flat

filter (D).

Unlock the filter system

using the handle on the

microfilter, and remove.

3. Turn the handle about

a turn anticlockwise

and remove.

4. Take hold of the

coarse/fine filter (A/B) by

the handle with the hole and

remove from the microfilter (C).

MA36

5. Clean all filters thoroughly under running water.

6. Remove the flat filter (D) from the base of the washing

compartment and clean both faces thoroughly.

7. Put the flat filter back in the base of the washing

compartment.

MA31

8. Place the coarse/fine filter in the microfilter and press

together.

9. Put the filter combination in place and lock by turning the

handle clockwise to the stop. During this process ensure

that the flat filter does not protrude above the base of the

washing compartment.

Under no circumstances may the dishwasher be used

without filters.

MA32

To ensure a correct

working of the dishwasher,

NEVER try to remove the

upper spray arm.

If residues of soil have

clogged the holes in the

upper spray arm, remove

them with a toothpick.

Prolonged periods of non-operation

If you are not using the machine for any period of time you are

advised to:

1. Unplug the appliance and then turn off the water.

2. Fill the rinse aid dispenser.

3. Leave the door ajar to prevent the formation of any

unpleasant smells.

4. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature

is below 0°C. If this is unavoidable, empty the machine, close

the appliance door, disconnect the water inlet pipe and empty

it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

MA33