Zanussi ZDT8453 Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Zanussi ZDT8453. Zanussi ZDT8453 21 pages.

Imprimer la page

Forks and spoons should be placed in the removable cutlery

basket with the handles facing downwards and the knives with

their handles facing upwards.

If the handles protrude from the bottom of the basket,

obstructing the lower spray arm, load the cutlery with the

handles facing upwards.

Mix spoons with other cutlery

to prevent them from sticking

together.

For best results we

recommend you to use the

cutlery grids provided (if the

size and dimensions of the

cutlery allow it).

The cutlery basket is in two

parts which can be separated

to give greater loading

flexibility. To separate the two

parts, slide them horizontally

in opposite directions and

pull them apart. To

reassemble, reverse the

procedure.

The upper basket

The upper basket is designed for plates (dessert plates,

saucers, dinner plates of up to 26 cm in diameter), salad

bowls, cups and glasses.

Arrange items on and

underneath the cup racks so

that water can reach all

surfaces.

Glasses with long stems can

be placed upside down in the

cup racks.

For taller items, the cup racks

can be folded upwards.

Light items (plastic bowls

etc.) must be loaded in the

upper basket and arranged

so they do not move.

In case that plates are loaded in the upper

basket:

load them starting from the

rear positions of the basket;

tilting them slightly

forwards and avoiding the

front positions near the

door.

Before closing the door, ensure that the spray arms can

rotate freely.

UI63

UI62

US47

US73

US71

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower

basket after moving the upper basket to the higher position.

With upper basket raised

With upper basket lowered

To move to the higher position proceed as

follows:

1. Pull out the basket until it stops.

2. Carefully lift both sides upwards until the mechanism is

engaged and the basket is stable.

Attention!

Never lift or lower the

basket on one side only

When the basket is in the

higher position you will not

be able to use the cup

rack(s).

To lower the basket to the original position

proceed as follows:

1. Pull out the basket until it stops.

2. Carefully lift both sides upwards and then allow the

mechanism to drop back down slowly, keeping hold of it.

After loading your machine always close the door, as an

open door can be a hazard.

Maximum height of the dishes in

upper basket

lower basket

22 cm

33 cm

26 cm

29 cm

RC08