Zanussi ZDV 12001 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZDV 12001. Zanussi ZDV 12001 16 pages. Dishwasher
Imprimer la page
detergent, rinse aid and dishwasher salt,
do these steps:
1. Press the on/off button to activate the appli-
ance.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the
rinse aid dispenser are full.
4. Start the shortest programme with a rinsing
phase, without detergent and without
dishes.
5. Adjust the water softener to the water hard-
ness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to ac-
cept some operations.
The appliance is in setting mode when, after
the activation:
• All the programme indicators are off.
• The end indicator flashes.
If the control panel shows other conditions,
press and hold the programme button until the
appliance is in setting mode.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode.
3. Press continuously the programme button
until the indicator of the programme you
want to set comes on.
Care and cleaning
Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
www.zanussi.com
4. Close the appliance door. The programme
starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the programme
1. Open the appliance door.
2. Press and hold the programme button until
the indicator of the set programme goes off
and the end indicator flashes.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, an inter-
mittent acoustic signal operates and the end in-
dicator comes on.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
can be easily damaged.
• First remove the items from the lower basket,
then from the upper basket.
There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the dishes.
9