Zanussi ZSF 6161 S Manuel de l'utilisateur - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Zanussi ZSF 6161 S. Zanussi ZSF 6161 S 28 pages.

Inlet hose

Connect the inlet hose to a water tap with an external

thread of 3/4".

The inlet hose can be turned either to the left or the

right to suit the installation by means of the locknut.

The locknut must be correctly fitted to avoid water

leaks.

Connect drain hose to the

sink.

If you use a drain hose extension the total

length should not be longer than 4 metres.

Likewise the internal diameter of the couplings

used for connections to the waste outlet must

be no smaller than the diameter of the hose

provided.

Required height: 30 to 100

cm above bottom of the

dishwasher.

Ensure that the hoses are

not kinked, crushed or en-

tangled.

When connecting the

drain hose to an under

sink trap spigot, the entire

plastic membrane (A)

must be removed. Fail-

ure to remove all the mem-

brane will result in food

particles building up over

time eventually blocking

the dishwasher drain hose

spigot.