Zanussi ZF711W Livret d'instructions - Page 15

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} Zanussi ZF711W. Zanussi ZF711W 20 pages. Zanussi instruction freezer zf711w

Imprimer la page

1. To Start the Freezer and Thermostat Control

Climate

for an ambient temperature of

classification

Electrical connection

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

This appliance must be earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity

supply voltage is the same as that indicated on the

appliance rating plate.

The appliance is supplied with a 13amp plug fitted.

In the event of having to change the fuse in the plug

supplied, a 13amp ASTA approved (BS1362) fuse

must be used.

Should the plug need to be replaced for any reason.

The wires in the mains lead are coloured in

accordance with the following code:

Green and yellow

-Earth

Blue

-Neutral

Brown

-Live

The wire coloured green and yellow must be

+10°C to +32°C

+16°C to +32°C

+18°C to +38°C

+18°C to +43°C

If the cabinet is placed in a corner and the side with

the hinges facing the wall, the distance between the

wall and the cabinet must be at least 10 mm to allow

the door to open enough so that the baskets can be

removed.

connected to the terminal marked with the letter "E"

or by the earth symbol

yellow.

The wire coloured blue must be connected to the

terminal marked "N" or coloured black

The wire coloured brown must be connected to the

terminal marked "L" or coloured red.

Upon completion there must be no cut, or stray

strands of wire present and the cord clamp must be

secure over the outer sheath.

or coloured green and

Zanussi 818 15 02--03/3