Aleko LOCKMASTER L110C Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aleko LOCKMASTER L110C. Aleko LOCKMASTER L110C 17 pages.

L110C/L110 SLIDING GATE OPERATOR

Fig.4 L110

Conduit

In order to protect the wires, conduit must be preset into the concrete when it is poured. Wires

within the conduit shall be located or protected so that no damage can result from contact with

any rough or sharp part.

Concrete pad

The base unit of the gate operator requires a concrete pad in order to maintain proper stability.

The concrete pad should be approximately 300mm x 260mm x120mm deep in order to provide

for adequate operation.

Anchors

You can use the anchor bolts, anchors, washers, and nuts. These anchors must be set into the

concrete when it is poured, or you can use wedge anchors.

Chain

Installation 1

Installation 2

Sprocket bracket

Tighten bar

Conduit

Anchor bolt

Anchor

Fig.5