Alemite 7336-B Manuel d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Alemite 7336-B. Alemite 7336-B 20 pages. Heavy-duty hose reels

 Screw the swivel assembly into the base

and shaft assembly.

. Tighten the swivel assembly

securely.

Medium- and high-pressure

swivel assemblies

 Screw  ° union ( or ) [with thread

sealant] into the swivel body and stud

assembly.

Model dependent step

 Install and seat back-up washer () and

seal () onto body and stud assembly ()

[models -B]. Install and seat seal

() [heel end ﬁrst] onto body and stud

assembly () [model -B].

 Screw the swivel assembly into the base

and shaft assembly.

. Tighten the swivel assembly

securely.

Bench test

While facing the ratchet on the power spring

Assembly, turn the reel in a counterclockwise

direction and allow the ratchet to latch the

Pawl.

If the reel does not tension or latch

properly, refer to the

Troubleshooting chart, page .

On the bench

 Feed the end of the delivery hose

through the opening in sheave

assembly ().

Model Dependent Step

 Screw the delivery hose securely into

 ° union ( or ) or into swivel stud

().

NOTE

Final u-bolt adjustment must occur

after the hose has been pressurized.

Heavy-duty hose reels - section view



Fig. 

Refer to ﬁg. IPB, page  parts list for parts

identiﬁcation.