DiscoSmash DSR-X20 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DiscoSmash DSR-X20. DiscoSmash DSR-X20 17 pages.

3. DAILY USAGE

When everything is configured correctly (how to do all this

will be explained later) you just need to push 1 of the 20

preset buttons to activate a sound.

While this sound is playing, the corresponding button will

blink and a progress bar will see how much has been played

already.

While playing the "stop" button will be illuminated,

indicating that you can use it to stop the sound. Depeding

of how the "interruptable" setting of the playing sound is

(see later), the sound can be interrupted by playing another

or you have to wait untill it stopped playing before you can

start another sound.

The "stop" button can stop any sounds, interruptable or

not!

3.2 Adjusting the volume

From any menu, the volume buttons (+ and -) will always be

available to adjust the volume. A volume bar at the right of

the display will show you the current volume.

Warning:

The volume will be saved at the same time as the tone

control (see section 7.3).

To open the menu: press the "E" (enter) button.

In each menu, the buttons that can be used at that place

will be illuminated, others not.

To go trough the menus you can use the navigation buttons

(up and down), to enter a menu you can use "E". In some

menus, to enter another menu, you can just push on the

button with the number that is written next to the menu

item that you want instead of using the navigation keys.

For going back, always number 0 (= stop button) is used.