Discount Car Stereo A2DIY-CR12 Démarrage rapide Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 6 pages. For porsche cr-1& cr-2 radios

Imprimer la page
Insert 3 ft. USB male terminal through ¾" hole created in
2.
step 1 and connect Module (See Fig. 9)
Fig. 8
USB cable with bracket
Fig. 9
Module inputs ports (shown with optional USB)
Push USB head (See Fig. 10) until it snaps in place and flush
3.
with mounting surface (See Fig. 11)
Fig. 10
USB head
Flush mounted to dash
Tuck and secure any extra wire from moving parts and test
4.
operation (See Enabling the AUX section below)
A.
USB with Bracket Mount
1. Locate a flat surface at location of choice within 3.2 ft. of
radio and mount USB support bracket (See Fig. 12) to
surface using adhesive/tape or screws.
mounting bracket
2.
Repeat steps 2 from "Flush to Dash or Panel" instructions.
Tuck and secure any extra wire away from moving parts and test
See Bluetooth Pairing and Connection
operation (
Fig. 11
(No drilling)
Fig. 12