array K Python KP52 Mark I Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} array K Python KP52 Mark I. array K Python KP52 Mark I 15 pages.

Imprimer la page
KKP2-KP102

10. TEChNICAL SPECIfICATIoNS

ACOUSTICS
Power handling
360 W
Max power
600W
Frequency Range
100 Hz – 20 kHz (- 10dB)
8 Ω / 32 Ω (selectable)
Impedance
SPL 1W/1mt
96 dB
Maximum SPL
122 dB (cont.) – 128 dB (peak)
COVERAGE
Horizontal
90°
Vertical
10°- 45° (selectable)
CROSSOVER
Type
External Crossover required
100 Hz, 24 dB/oct
Frequency
suggested minimum
TRANSDUCERS
6 x 3.15" Neodymium magnet with 1"
Full range
voice coil
SELECTION SWITCHES
8 Ω / 32 Ω
Impedance
Coverage
Spot / Flood
POWER AUDIO INPUT/LINK
Connector
2 x 4-pin Speakon
Wiring
1+ 1- (signal IN & LINK); 2+ 2- (through)
RECOMMENDED AMPLIFIERS
Type
KA24, KA84, KMT
CERTIFICATION
IP
54
PHYSICAL
8.9 x 52.0 x 11,8 cm
Dimensions
(3.5" x 20.5" x 4.6")
Weight
5.8 kg (12.8 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
KP52
(AES)
(1)
(2)
ACOUSTICS
Power handling
720 W
Max power
1200W
Frequency Range
100 Hz – 20 kHz (- 10dB)
4 Ω / 16 Ω (selectable)
Impedance
SPL 1W/1mt
99 dB
Maximum SPL
128 dB (cont.) – 134 dB (peak)
COVERAGE
Horizontal
90°
Vertical
7°- 30° (selectable)
CROSSOVER
Type
External Crossover required
100 Hz, 24 dB/oct
Frequency
suggested minimum
TRANSDUCERS
12 x 3.15" Neodymium magnet with 1"
Full range
voice coil
SELECTION SWITCHES
4 Ω / 16 Ω
Impedance
Coverage
Spot / Flood
POWER AUDIO INPUT/LINK
Connector
2 x 4-pin Speakon
Wiring
1+ 1- (signal IN & LINK); 2+ 2- (through)
RECOMMENDED AMPLIFIERS
Type
KA84, KMT
CERTIFICATION
IP
54
PHYSICAL
8.9 x 100.0 x 11,8 cm
Dimensions
(3.5" x 39.4" x 4.6")
Weight
12 kg (26.5 lbs)
KP102
(AES)
(1)
(2)
Ver. 2.2
15