Acoustical Manufacturing Co. Quad 34 Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Acoustical Manufacturing Co. Quad 34. Acoustical Manufacturing Co. Quad 34 11 pages.
Imprimer la pageSPECIFICATION
Inputs:
Disc*
cD*
Radio
Tape*
Outputs: Amplifief
Tape*
xltx2
Distortion:
ResidualNoise:
Frequency Response:
Interchannel Balance:
Filterc,Bass Step
and Tilt (+3 to -3):
Mains voltage:
Power consumption:
Fuse:
Dimensions:
Weight:
S / N : V o l M a x .
V o l a t 1 5
3 mV / 47 kctl220 pF
75 dB
87 dB
300 mV / 49 kO
100 mV/100 kO
300 mV 157 ka
87 dB
98 dB
88 dB
99 dB
87 dB
98 dB
(Noise figures'A'weighted
, dB below 500 mV output)
500 mV/830o (1.6V max).
300 mV/2k24 (tape record).
As tape (from disc, CD and radio only).
Worst case, any input 0.05%.
'A'weighted. Volume controlat minimum -105 dB.
Any input (except Disc) +6.3 dB, 30 Hz- 20 kHz.
Disc RIAA flat within 10.5 dB. 30 Hz - 20 kHz.
10.5 dB volume control settings max. to -60 dB.
See graphs.
110-120V or 220-240V (changed by links on PCB)
50-60 Hz: see rating plate on back of control unit.
7W approx.
63 mA anti-surge, 200-240V.
100 mA anti-surge, 100-130V.
Width 321 mm; height 64 mm;
depth 207 mm approx. (plus connectors)
3.2 kg approx.
* Other options available.
The right is reserued to alter performance and specification as required.
This equipment complies with the radio inbrterence requirements as laid
down in EEC (European Economic Community ) regulations.
page 8