djpower H-2VD Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower H-2VD. djpower H-2VD 19 pages.

Fog Machine H-2VD

4.1.2. DMX table

If the device is controlled with a DMX signal, the display shows the set DMX

address.

Kanal

Wert von

4.1.3. Fluid Sensor

This machine has a software-based fluid sensor that is designed to protect the

pump from damage. Turn on the "Fluid Sensor" to activate the "NO FLUID"

protection function.

4.1.4. Activate the No-Fluid sensor

As soon as the Fluid Sensor is switched ON, the software based "NO FLUID"

protection function is activated. If the program detects that the pump is no

longer pumping fluid, the pump switches off automatically and draws

attention to the problem with a warning message on the display.

4.1.5. Reset the "NO FLUID" warning

After the machine initiated the "NO FLUID" protection function, after refilling

the fluid, there are three ways to reset the warning.

• Hold down the "Enter" key until the pump is again supplied with fluid. In

this case, the machine starts to emit fog again.

• In DMX mode, drag the DMX channel assigned to the machine on the

lighting console down to the value 0. Then drag the channel to the

highest value (255).

• Turn off the "FLUID SENSOR" in the menu.

Wert bis

Funktion

Keine Funktion

255

Nebelausstoß

12 / 18