ALUZ A1-ZYZY-SQR Manuel d'instructions d'installation
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} ALUZ A1-ZYZY-SQR. ALUZ A1-ZYZY-SQR 11 pages.
Imprimer la pageZYZY
Square
A1-ZYZY-SQR
GENERAL FEATURES
Applications
Surface Mount Direct View
Lens
100% Frosted (No Pixelation: Line of Light)
Built to Order: Custom lengths up to 8' (No Seams)
Specify Overall Length (Minimum: 2', Maximum: 8')
Example: 7'8" = One 7'8" luminaire (Custom Length)
Length
Example: 3'2" = One 3'2" luminaire (Custom Length)
Example: 13'6" = 8' + 5'6"
Example: 23'8" = 8' + 8' + 7'8"
Construction
Aluminum Extrusion
Weight
1.09 lbs per foot
Mounting
Mounting Plates (Sold Separately)
Dry, Damp, or Wet Location
UL1598, CSA C22.2#250.0
Listing
UL8750, CSA250
UL2108, CSA C22.2 #9
Driver
Integral (Driver on Board)
Temperature
Operating / Startup: -20° to 48°C (-4° to 120°F)
Ratings
Storage: -40° to 76°C (-40° to 170°F)
Installation Link
ELECTRICAL
Dimming
0-10V, DMX, DALI
Maximum Run
40' (4W, 5W, 6W, 8W), 26' (12W)
(Class 1 Line Voltage
Integral Driver)
Luminaire Voltage
120V - 277V (UNV)
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
END VIEWS / DIMENSIONS
3.44"
Dry or Damp Location
(No Visible Screws)
PRODUCT INFORMATION
• Lighting for direct view and accent lighting.
• Line Voltage 120-277V (UNV) integral drivers .
• Long life, energy effi cient LEDs.
• Choose from a variety of LED colors and whites.
• Can be ordered to specifi c lengths for when exact dimensions are known.
ELECTRICAL REQUIREMENTS
• Line voltage luminaires do not require a remote driver
• Maximum load per line voltage luminaire is 320 watts per circuit
INSTALLATION TOOLS REQUIRED
• Electric Hammer Drill
• 14.4 to 28 Volt Cordless Drill
• Phillips Bits
• Utility Knife
• Electrical Cord
• Marker
• Wire Stripper
ALUZ
1170 North Red Gum Street, Anaheim, CA 92806
Phone: 800 921 2254 or 714 535 7900 | Fax: 714 535 7902 | [email protected] | aluz.lighting
© ALUZ All rights reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
Important Notice: Verify correct luminaire was received with correct
color temperature, voltage, and wattage before cutting or installing.
ALUZ will not be responsible if incorrect luminaire is installed.
1.87"
Installation Instructions
9 / 1 / 2021 / Rev 0
Page 1 of 11
Overview
1.87"
3.44"
Wet Location
(Visible Screws)
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tape
• Laser Line or Chalk Line