ASGCO U-Scrape Instructions d'installation, d'utilisation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} ASGCO U-Scrape. ASGCO U-Scrape 7 pages. With bolt-up tensioner system

Imprimer la page

PROCEDURE

Mount the bolt-up brackets first. The mounting holes need to accept 1/2" bolts. You can install the bolt-

ups with the supplied hardware and leave the brackets hanging down just enough to install the spring

plates. Then tighten the bolt-ups down.

Step 1

Pre-assemble the spring hanger extension

brackets to the spring plates, and the bushing

adjusting brackets with supplied hardware

before hanging the bolt-up brkts.

Step 2

Hang the U-Scrape with its tube on the bush-

ing adj. angles, and slide on the 2 each tube

bushings.

Step 3

Next bolt into place the tube bushings using

the supplied hardware.

Spring Hanger

Extension

Bracket

Bolt-Up Bracket

U-Scrape with Tube

Tube Bushing

Bushing Adj. Angle

U-SCRAPE™ INSTALLATION

Spring Plates

Bolt-Up Bracket

Bushing Adj. Angle

Spring Plates

Bushing Adj. Angle

Tube Bushing

Bushing Adj. Angle

U-Scrape™