ASI 0141 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ASI 0141. ASI 0141 6 pages. Surface-mounted automatic hand dryer

Imprimer la page

Hand Dryer

Recommended mounting heights

Men

Women

Children 4-7 years

Children 8-10 years

Children 11-13 years

Children 14-16 years

Handicaped

Operation

Hands-Free operation.

Shake excess water from hands.

Place hands under the outlet to start operation.

Rub hands lightly and rapidly. User may flip-tilt

nozzle to dry face.

Stops automatically after hands are removed.

Nozzle returns to original position when

released by user.

Cleaning and Maintenance

Periodic cleaning of the unit is recommended to ensure optimum performance.

Disconnect the electrical supply.

Remove the two cover-mounting screws.

Remove the cover.

Clean all dust lint from the interior of the dryer.

Wipe the cover with a damp cloth and mild

cleaning solution. Do not Soak. Never use

abrasives to clean the cover.

Replace the cover. Do not over tighten the screws.

Warranty

All of our dryers are designed and manufactured to provide years of dependable performance.

Component parts are guaranteed to be free of defects in material and workmanship for a period of

Ten years. This guarantee will be honored provided that the dryer is installed and maintained in

accordance with the instructions. Parts damaged during the Installation are the purchaser's

responsibility. ASI's warranty covers defects exclusively, and only liability for the replacement of

defective parts will be accepted. This warranty does not cover wear and tear, or misuse and abuse.

Transportation, freight costs and labor are also excluded. Defective parts must be returned prepaid,

accompanied by the unit serial number, to the point of purchase. This warranty is granted solely to

the original purchaser of the unit and is subject to registration.

06092857

Operating Instructions and Parts Manual

Surface-mounted Automatic hand dryer

50"

(1270 mm)

47"

(1194 mm)

35"

(889 mm)

39"

(991 mm)

43"

(1092 mm)

47"

(1194 mm)

40"

(1016 mm)

- from bottom edge of dryer above finished floor (AFF)

Reference ADAAG

Reach LIMIT (unrestricted)

All Approaches

Circuit Diagram

MODEL # 0141 100-120Vac

MODEL # 0144 208-240Vac

Thermal Switch 16A

on Heater element

P/N A0090

(Brown)

(Blue)

N/L2

(G/Y)

CIRCUIT BOARD

0141 P/N A0097

0144 P/N A0098

AFF (maximum)

48"

(1219 mm)

The ground wire must be connected

NOTE

to the dryer's backplate.

Service by qualified electrician ONLY .

Supply line 75 C requirement.

Do not daisy chain the ground wire.

Connect to 20A branch circuit ONLY .

(Brown)

(Black)

(Gray)