EGAmaster EGATRONIK 51250 Manuel d'utilisation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} EGAmaster EGATRONIK 51250. EGAmaster EGATRONIK 51250 20 pages. Earth ground tester
Imprimer la pageWarning
-
Do not use the Tester if it is damaged or metal part is exposed.
-
Do not disassemble the tester un-intentionally. If it needs repair, please contact our after-
sales services or our agents.
-
Do not change battery or open battery compartment when the Tester is wet. Soft cloth
should be used to dry it first, and then carry on.
-
Make sure the Tester is turned off when changing battery or opening the battery
compartment.
Caution
-
Ensure test lead probe insert into the corresponding port before measurement.
-
Take the battery out from the Tester if it is not used for a long time.
-
Do not expose the Tester in extreme temperature and wet environment.
-
Soft cloth and mild detergent should be used to clean the surface of the Tester when
servicing. No abrasive and solvent should be used.
-
Dry the tester before storing if it is wet.
This Tester has the follow signs,please pay attention to the content when using:
The Tester is using micro controller with high accuracy and reliability; it can measure every
electric wire, electric installation, anti-thunder equipmentís earth resistance value of those earth
system. Also, it can carry earth voltage measurement. (Note: the Tester should not be used outdoor
hazard environment, like raining, thunder etc.)
2.1 - With backlight display and battery check function.
2.2 - Data logging for 20 sets of data.
2.3 - With auto switch-off save energy function.
2.4 - Precision 3-Wires Testing and Simple 2-Wires Testing.
2.5 - During earth voltage testing, if C port or E port don't contact properly, LCD display
will show "- - - - Ω" indication.
2.6 - Over-range Display"OL"indication.
2.7 - Double insulation or reinforced insulation safety manufacturing.
12
identifies danger, warning, caution
identifies AC[AC]
identifies double or reinforced insulation
Grounding
Conforms to Standards of European Union