Asko D5526XLFI Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Asko D5526XLFI. Asko D5526XLFI 20 pages.
Également pour Asko D5526XLFI : Manuel de conception (20 pages), Manuel de conception (20 pages)

Imprimer la page

Hyg

Hygiene wash

This program is recommended for baby bottles and cutting

boards when additional sanitation is required. The temperature

is high in the main and final rinse.

Delicate wash

If the dishes are only lightly soiled, you can select Delicate wash.

This program is intended for glasses and porcelain that have just

been used and as such do not require such a powerful program.

This program can be used for fragile dishes. Select Short dry to

be extremely cautious. See also the section Fragile dishes in

Chapter Loading the dishwasher.

Eco wash

This program is most effective in terms of combined energy and

water consumption.

Rinse & Hold

Use to rinse dishes while you wait for the dishwasher to become

fully loaded.

Selecting Options

To select an option, press one of the option buttons. The field

under the button lights when the option is activated. The available

options depend on the selected program. Once you have started

the program, the options you selected are saved for the next time

you use the same program.

High temperature

Activate this option for improved dishwashing results. The ma-

chine then uses a higher temperature for the main wash.

If you want to use the lower temperature, press again so that the

field under the button turns off.

You can vary the temperature as shown below:

Sanitation wash:

Normal wash:

Heavy wash:

Quick wash:

Delicate wash:

Eco wash:

Long dry

Activate Long dry to increase final rinse temperature and dry time

to improve drying results. This causes a slight increase in energy

consumption. This option can be used with all programs except

Rinse & Hold.

If you want a program with Short dry, press again so that the field

under the button turns off.

150 °F (65 °C) / 160 °F (70 °C)

133 °F (56 °C) / 150 °F (65 °C)

140 °F (60 °C)/150 °F (65 °C)

85 °F (30 °C) / 140 °F (60 °C)

105 °F (40 °C) / 120 °F (50 °C)

130 °F (55 °C) / 140 °F (60 °C)

Start the dishwasher

Press and hold Start/Stop until the display shows

open symbol). This indicates that the dishwasher is ready to start.

Close the door properly, otherwise the dishwasher will not start.

NOTE!

If the machine does not start within 2 minutes of the last button

press, the display returns to showing the last program run.

Time remaining

Once you have selected a program and options, the display indi-

cates how long the program took the last time it was used. The

remaining time is updated after the water for the final rinse has

been heated.

This may differ somewhat from time to time depending on the

temperature of the water supply, the amount of dishes, the ambi-

ent temperature, and other factors.

NOTE!

During the first run of each program, the remaining time dis-

played can be slightly misleading, as the dishwasher is estimat-

ing the time. When you run the program a second time, the

dishwasher will calculate the remaining time based on the

previous duration of the program.

Stopping or changing a program

If you want to change programs after starting the dishwasher,

open the door then press and hold Start/Stop for three seconds.

Add more detergent if the lid of the detergent dispenser has

opened. Then choose a new program, press Start/Stop, and close

the door.

Do you want to add more dishes?

Open the door. The dishwasher stops automatically. Add the

dishes, close the door, and the dishwasher resumes the program.

If the dishwasher is turned off using

the On/Left-on mode button or due

to a power failure

If the program was not finished, the interrupted program resumes

when power is restored.

NOTE!

During drying, the program is interrupted if the power is cut or

the door is open for more than 2 minutes.

Once the program has finished

Once the program has finished and the door is opened, "End"

appears on the display.

At the end of the program, one short signal will sound. Chapter

Settings describes how to change this function.

Once the cycle is complete, the dishwasher uses standby power

only.

(the door