AMCI SD7540A Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol AMCI SD7540A. AMCI SD7540A 16 halaman.

ADV ANC ED

MIC RO CON T RO L S INC.

CHANGING THE SD7540A CONFIGURATION SETTINGS

Equipment required for changing the drive settings:

•

Power supply – 24 to 75VDC, 4 Amps;

•

Programming cable - AMCI CSMD-5, 5 ft serial cable(optional). It connects the drive to a

PC. The connections are described in the document. The drive circuit provides optical

isolation from the PC;

•

PC running Windows 98/2000/XP;

•

AMCI SPI Programming software, downloadable from the AMCI website (www.amci.com);

Procedure:

1. Install the AMCI SPI Programming software on the PC.

2. Connect the programming cable(AMCI part# CSMD-5, optional) to the SD7540A.

3. Connect the power supply to the same connector (follow the specified polarity).

4. Connect the D-Sub connector of the programming cable to the serial port of the PC.

5. Run the AMCI SPI programming software. The following window will appear on the screen:

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786

Tel: (860) 585-1254

Fax: (860) 584-1973

Web: www.amci.com

SD7540A Stepper Drive

page: 13