Acer AL1922 r Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Acer AL1922 r. Acer AL1922 r 20 halaman. 48cm(19”) tft color lcd monitor

ADJUSTING THE VIEWING ANGLE

•

For optimal viewing it is recommended to look at the full face of the

monitor, then adjust the monitor's angle to your own preference.

•

Hold the stand so you do not topple the monitor when you change the

monitor's angle.

•

You are able to adjust the monitor's angle from -6° to 15°.

ADJUSTING THE VIEWING ANGLE

Your monitor features a multi-adjustable stand that will enable it move

100mm up/down (height adjustment), 25 degree forward/backward (tilt

adjustment), 70 degree side/side (swivel adjustment). To make an adjustment,

grasp the monitor with both hands on the right and left edge of the casing

and move it to the desired position.

Before adjusting the height, be sure to pull out the pin indicated in the figure

(for details, please refer to Support Frame on Page 4).

Rotate Adjustment

1. Before adjusting the height, be sure to pull out the pin indicated in the figure. as per

Fig. 1.

2. To rotate the screen, set the screen position to the highest height, as per Fig. 2.

3. Hold the left and right sides of screen with both hands and then turn 90 degrees in

clockwise direction.as per Fig. 3.

4. After rotation is complete, adjust the screen height to suit your own position. as per

Fig. 4.

5.To return to original position, turn 90 degrees in counter clockwise direction. as per

Fig. 5.

6. After rotation is complete, adjust the screen height to suit your own position. as per

Fig. 6.

In order to use the Pivot function, the included Pivot Software must be

installed.

NOTES

Do not touch the LCD screen when you change the angle. It may cause

damage or break the LCD screen.

Careful attention is required not to catch your fingers or hands when you

change the angle.

(Only AL1922)

-6

(Only AL1922 h)

(Only AL1922 r):