aero-naut Scarlet Petunjuk Bangunan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Bangunan untuk Mainan aero-naut Scarlet. aero-naut Scarlet 7 halaman.
Halaman Cetak
Parts List
1) Fuselage, white pigmented
2) Canopy, black
3) V-tail and control surfaces
4) Wing centre section with flaps, covered
5) Outboard wing panels with ailerons, covered
6) Aileron / flap servo covers
Contents of small parts bag:
7) Servo plate
8) V-tail joiner rods
9) V-tail support rail
10) V-tail horns
11) Wing joiners
12) Wing incidence pegs
13) Wing locating peg
14) Wing retainer screw
15) Motor bulkhead
16) Short horns (aileron)
17) Long horns (flap)
18) Horns, spreader plate and screws
19) Clevises with threaded couplers and pins
20) Aileron / flap pushrods
21) Fuselage formers for tail snakes
22) V-tail pushrods
23) Wing servo mount
24) Captive nut
25) Captive nut washer
26) Canopy tongue
27) Canopy locating pin
28) Building instructions
Essential accessories
Knife, metal file, straight edge, ruler, set of screwdrivers, 5-minute epoxy, thick and thin cyano-
acrylate, paper masking tape, soldering iron, 4 m x 0.14 sq mm twisted servo cable, 6-pin plug and
socket.
Recommended RC equipment
6 servos (each 9 - 13 mm)
Receiver (min. 5-channel)
Recommended power system
Motor:
Battery:
Scarlet building instructions
500 Watt
4S LiPo / LiIon
1
GRP, ready made
1
Ready made
2 (l + r)
Wood construction, ready made
1
Styrofoam / wood, ready made
2 (l + r)
Styrofoam / wood, ready made
2 pairs
Vacuum-moulded plastic
1
Poplar plywood, machined
2
Steel, pre-formed
1
Balsa, ready made
2
Pre-formed rod with ball-link
2
GRP / CFRP, 8 Ø x 140 mm
2
CFRP, 3 Ø x 20 mm
1
Beech dowel, 4 Ø x 38 mm
1
Nylon, M5 x 20 mm
1
GRP, ready made
2
Plastic, ready made
3
Plastic, ready made
2 sets
Plastic, ready made
6 sets
Ready made
4
Steel wire with Z-bend, 75 mm
1
Wood, ready made
2
Steel wire, 0.8 Ø x 800 mm
4 pairs
Wood, ready made
1
Ready made, M4
1
Wood, ready made
1
GRP, ready made
1
1 Ø x 26 mm
1
Ready made
Scarlet
2