AEROBASK EPIC E1000 Panduan Pemilik - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan AEROBASK EPIC E1000. AEROBASK EPIC E1000 19 halaman.

THE GARMIN GNC255 RADIOS

Our Epic E1000 Skyview is equipped with two Garmin

GNC255 radios for controlling COM and NAV

frequencies. One radio is above the pilot's PFD, the

second one is above the co-pilot's PFD.

Click the COM knob to power on the device (please note

that avionics needs to be switched on first.) The display

either shows COM or NAV; you can toggle this with the

C/N button. If a given frequency has a published name

(such as NTTM ATIS), it is shown beneath the frequency.

Use the FUNC button to toggle between traditional and

8.33 Khz channel spacing.

The other buttons of the GNC255 are not simulated in

this version of the aircraft.

Toggle

Click: Power-on

Active/Standby

Turn to

Toggle

change

8.33 Khz

COM/NAV

standby

COM spacing

frequency

Name of

selected COM

frequency

To control the audio output of the radios, use the Garmin

GMA 350 audio panel, located on the pedestal, below the

MVP50 and above the throttle. Blue triangular LEDs

above the various audio source buttons (such as COM1,

NAV1, etc.) indicate that you will hear the related audio

source. Press the button to mute the respective source;

GMA350

press again to switch it on.