AerobTec Altis Micro Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur AerobTec Altis Micro. AerobTec Altis Micro 17 halaman. Recording / competition altimeter with telemetry

Halaman Cetak

Fig 7: Device choosing window

There are two parts of the window. The upper part shows general information about the device – its

firmware version, serial number and used memory.

The bottom part of the window is used for settings.

In order to access the logged data from your Altis Micro, use the Download data button. Once the data is

downloaded, you can close the Device window and work with the data.

There are many possible configurations for the Altis Micro. You can set your Altis Micro according to your

needs. This is done by using the settings tabs in the bottom part of the window.

There are several tabs:

Logging Settings (Fig 8) – Here you can set how you wish to store the flight parameters to your device

memory. The basic parameter, Sample time, determines how frequently the parameters will be logged.

You can set which parameters you wish to log. You can log altitude, temperature of the device (note: the

device is usually several degrees warmer than its environment), input throttle PWM (signal from the R/C

system), output throttle (signal to ESC) and the voltage on board (the voltage Altis Micro is powered from).

Note that the more parameters you log or the lower the sample time is, the more memory it consumes.

However, there is memory enough to log about 15 hours of data when logging almost all available

AerobTec Altis Micro User Manual