AeroClave RDS 3110 Panduan Pemecahan Masalah - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Peralatan Pembersih AeroClave RDS 3110. AeroClave RDS 3110 4 halaman.
Juga untuk AeroClave RDS 3110: Panduan Referensi Cepat (5 halaman)
Halaman Cetak
1) Reassemble the unit using the reverse of initial steps 1-4
2) Run the unit to verify that functionality is restored.
3) If the problem is not resolved, please call your representative
(SYMPTOM: The unit appears to be running normally but is only blowing air from heads)
1) Locate the pump impellers at the bottom right of the unit. These are the 3 white plastic disc
shaped objects
2) Depress the 2 finger tabs located on the side of the impellers. Gently pull the impeller off the
spindle which extends into the impeller.
Rev 3.21
Reassembly Steps
Pump and Filter Check
*If no pump issues please skip to Step 6*
2