Air & Allied Sales MP-35A Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Air & Allied Sales MP-35A. Air & Allied Sales MP-35A 11 halaman. Air nippers

Halaman Cetak

Model No.

Product name

Product description

Length

（ｍｍ）

Weight

（ｇ）

Grip diameter

（φ）

Air consumption

（ｃｍ3/回）

Welding pressure

(N)

Air pressure

（Mpa)

Noise emission values

(based on ISO 15744)

Vibration values

(3 axes integrated:

based on ISO 20643)

Be sure to observe maintenance check.

If check is neglected, it will become an accident and a cause of failure.

Be sure to perform maintenance check before work and after work.

Remove an air hose at any cost in the case of check and care.

・Check whether there is neither dirt nor a crack in the appearance of a main part and an air hose.

・Check whether there is neither slack nor an air leak in each connection part, the screw, the nuts,

main part, and air charging line part of a main part.

If it is used in the state where it loosened, the accident in the circumference of a worker and

a workplace may be caused, and the lack of ability by main part breakage or air leak is caused.

・Carry out the check of operation of whether the air nipper is operating normally.

(Refer to the diagram of an operation manual of operation for normal operation. )

・The scupper method of an air compressor

If an inside is covered with water or oil, it will become a cause of failures, such as generating of rust.

Remove the oil or water from inside the air compressor by drain port, before and after using

Use the dry pure compressed air.

( Refer to the operation manual of an air compressor for details. )

・Piping

Be sure to use the air which let the air filter pass and which does not contain moisture.

Remove finely so that the garbage adhering to a nipple, etc. do not enter in a hose.

・Confirm whether to find abnormality in the air compressor.

( Refer to the operation manual of an air compressor for details. )

・Every hour five or six drops should lubricate the union portion of blades during work .

・Use it by the appointed air pressure power.

It is maximum use air pressure power 0.6MPa of this machine.

Use it within the limits of this.

If it is used by the air pressure power beyond 0.6MPa, there will be a burst of the body

and fear of damage and it will become a cause of an injury.

[email protected]

Product specification

To help you achieve higher productivity and remarkable cost saving in cutting,

squeezing, pressing, bending and punching jobs for modern industries . Equipped with

different types of replaceable cutting blades , this AIR NIPPER can be versatile for

A-weighted sound

pressure level: dB(A)

67.6

Vibration value: m/s2

5.2

Maintenance

4/11

Air & Allied Sales (Pacific) Pty Ltd

MP-35A

AIR NIPPER

various applications .

268

920

φ56

956

4,410

0.5～0.6

A-weighted sound

power level: dB(A)

72.5

Uncertainty K

2.09

2.51