Akura MSD306 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk TV LCD Akura MSD306. Akura MSD306 3 halaman. Msd306
Juga untuk Akura MSD306: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (3 halaman)

Halaman Cetak
Akura MSD306 Panduan Memulai Cepat
To fit the base plate.
Place the TV face down on a suitable surface with the base mounting facing you (Fig 1).
Apply the base plate to the base mounting and fit the four screws provided. Tighten the four screws using a "Posi No 1"
screwdriver.
To mount the TV on a wall you need to purchase a VESA Standard (100mm) bracket.
Remove the screws as shown above.
Mount the wall bracket as described by the manufacturer.
Mount the TV to the wall bracket using 4 x 4mm x 10mm set screws. (Do NOT use longer screws as the internal parts of
the TV may be damaged).
Akura accepts no responsibility for damage, caused to or by, incorrect mounting of the wall bracket.
There are many variations of Wall Mounting Brackets.
The "ARM" variety allow a greater movement of the TV into the viewing angle required.
The "Fixed Tilt" variety allow up and down Tilt.
The Fixed "Non Tilt" variety are fixed very close to the wall. To ensure suitable clearance of the Mains Plug, 4 x spacers
are provided. Attach these to the TV cabinet back and tighten before fitting the Wall Bracket plate.
Base fitting and removal.
Fig 1