Akuvox C317 Series Panduan Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Sistem interkom Akuvox C317 Series. Akuvox C317 Series 4 halaman.
Juga untuk Akuvox C317 Series: Panduan Cepat (4 halaman)
Halaman Cetak
5
With embedded box in the wall
1
Make sure all cables in
the embedded box .
Step 2: Device Moun�ng
1
2
Twist M3x10.5 screw into the bottom hole of the wall bracket until
the tail of which align to the edge. Then fix the wall bracket on the
wall with two/four M4x30 screws. If there is a earth wire to be
connected , use M3x6 screw to fix it on the wall bracket.
2
Connect the
cables to device.
Twist M3x10.5 screw into the bottom hole of the
bracket until the tail of which align to the edge.
Then fix the wall bracket on the wall with four
ST4x20 screws. If there is a earth wire to be
connected, use M3x6 screw to fix it on the wall
bracket.
C317
Push down to fix the
device securely. Use the
Allen wrench to tighten
the device with one
M3x10.5 screw.