Air Cleaning Equipment Horizon Titan XG90 Panduan Instalasi dan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Dehumidifier Air Cleaning Equipment Horizon Titan XG90. Air Cleaning Equipment Horizon Titan XG90 13 halaman.
For future reference, write down the model, serial number, and date of purchase for your
dehumidifier. This is extremely helpful if you need to seek assistance in the future. The
data label on the side of your unit has key characteristics of your specific unit.
Model Number: Horizon Titan XG90
Serial Number:
For additional questions concerning your dehumidifier, the following options are available:
• Contact your installing contractor
• Call Horizon Dehumidifiers @ (919) 258-3330x4
• Email:
sales@horizondehumidifiers.com
Power Supply: 115 V, 60 Hz AC, Single Phase
Outlet Requirement: 3-Prong, GFI
Circuit Protector: 15 Amp
WARNING:
120 Volts AC may cause serious injury from electric shock.
To ensure safety:
1.
1. Disconnect electrical power before servicing
2.
2. Only plug unit into grounded electrical circuit
3.
3. Do not use extension cord
4.
4. Do not use a plug adapter.
The Horizon Series Dehumidifiers utilizes its integral humidistat to monitor the condi-
tioned space. When the relative humidity goes above the selected set point, the dehumidi-
fier will energize. Air is drawn across an evaporator coil, which is cooler than the dew point
of air. This means moisture will condense out of the air. The air is then reheated through
the condenser coil and distributed back into the room.
The area to be controlled should be sealed with a vapor barrier. If unit is installed in a
crawlspace, all vents should be sealed.
Identification
Date of Purchase:
Electrical Supply
Principle of Operation
Installation
3