American Standard Stratford 2470.018W Lembar Spesifikasi - Halaman 2
Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Bak mandi American Standard Stratford 2470.018W. American Standard Stratford 2470.018W 2 halaman. 5-1/2' whirlpool and bathing pool, americast brand engineered material
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER,
ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY RIM,
SUMP SUPPORT NOT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY
OTHERS
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH
WHIRLPOOL/BATH FOR ADDITIONAL INFORMATION.
OPTIONAL 3-WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED
SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
SHOWN WITH POP-UP C.D. & O.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
CONCEALED PIPING NOT INCLUDED.
GENERAL SPECIFICATIONS FOR 2470 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
3
CUBE (FT
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
235mm
(9-1/4)
SEE FITTING SPECS
FOR DIMENSION
19mm
(3/4)
C/L OF
SUPPLIES
813mm
(32)
406mm
(16)
32mm
(1-1/4)
C/L OF DRAIN
OUTLET
C/L OF
VALVES
305mm
(12)
102mm
(4)
70mm
(2-3/4)
C/L OF
OVERFLOW
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
66 x 32 x 20 In. (1676 x 813 x 508mm)
201 Lbs. (90 Kg.)
701 Lbs. (315 Kg.)
60 Gal. (227 L)
40 Gal. (152 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
55 Lbs./Sq.Ft. (223 Kgs./Sq.m)
13.9
33.7
1.6 HP, 9.7 AMPS,120V.
1676mm
(66)
OUTLINE OF 1638 X 775mm
FINISHED
(64-1/2 X 30-1/2) CUTOUT
WALL
229 X 305mm
(9 X 12) FLOOR CUTOUT
FINISHED
WALL
C/L OF
SHOWER ARM
1651-1982mm
C/L OF
SPOUT
32mm
(1-1/4)
508mm
SUPPORT
(20)
STRINGER
476mm
(18-3/4)
MIN.
117mm (4-5/8)
70mm
(2-3/4)
© 2005 American Standard Inc.
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
C/L OF 1/2
SUPPLIES
AS REQUIRED
76mm
(3)
19mm
(3/4)
813mm
(32)
203mm
(8)
406mm
(16)
32mm
(1-1/4)
C/L OF SHOWER
C/L OF DRAIN
CURTAIN ROD
OUTLET
1930mm (76)
OPTIONAL
TO FLOOR
SAFE-T-HEATER
REMOVABLE BLANK
1/2 SUPPLIES
AS REQ'D
102mm
324mm
(4)
(12-3/4)
70mm
(2-3/4)
C/L OF
OVERFLOW
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 2470 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
(65-78)
OPTIONAL
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of toler-
ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibili-
ty is assumed for use of superseded or voided leaflet.
STRATFORD™ 5-1/2'
1676mm
(66)
235mm
(9-1/4)
OUTLINE OF 1638 X 775mm
FINISHED
(64-1/2 X 30-1/2) CUTOUT
WALL
ON/OFF
SWITCH
PUMP
229 X 305mm
PROVIDE ACCESS
(9 X 12) FLOOR CUTOUT
FINISHED
WALL
711mm
(28)
32mm (1-1/4) DIA. HOLE
1/2 N.P.T. SHOWER
203mm
44mm (1-3/4) DIA. HOLES
(8)
FOR CONTROL VALVES
32mm (1-1/4) DIA. HOLE FOR
1/2 N.P.T. SPOUT
32mm
(1-1/4)
SUPPORT
STRINGER
476mm
(18-3/4)
MIN.
117mm (4-5/8)
70mm
(2-3/4)
66 x 32 x 20 In. (1676 x 813 x 508mm)
174 Lbs. (78 Kg.)
674 Lbs. (303 Kg.)
60 Gal. (227 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
48 Lbs./Sq.Ft. (206 Kgs./Sq.m)
TO PUMP FOR
SERVICING
ON ALL
INSTALLATIONS
1651-1982mm
(65-78)
OPTIONAL
508mm
(20)
13.9
33.7