DoorBird A1091 Series Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Laboratorium DoorBird A1091 Series. DoorBird A1091 Series 13 halaman. Gigabit poe-injector
Juga untuk DoorBird A1091 Series: Panduan Instalasi (12 halaman)

DEVICE
VIDEOS
Need help with the installation? Be sure to watch our installation videos
which can be found on http://www.doorbird.com/support.
Each individual step of the installation is clearly documented in the videos.

INSTALLATION

All steps below should be carried out carefully by a competent adult, taking
into consideration any applicable safety regulations. Should you have any
questions, please contact us or a competent specialist directly. Please ensure
that all wires used for the installation are undamaged along their entire
length and approved for this type of use.
Network speed and network components
Please ensure that the upload speed of your Internet connection is at least
0.5 Mbps. You can also carry out a speed test at any time via the DoorBird
LAN IN
1
RJ45 jack to connect a standard
Network cable Cat.5 or better,
coming from the Internet Router.
PWR
2
Power Input Diagnostic-LED.
15 VDC IN
3
Power supply (Input, 15 VDC).
POE
4
PoE Diagnostic-LED (Output).
POE + DATA OUT
5
RJ45 jack to connect a standard
Network cable Cat.5 or better,
going to the product to supply
with PoE and network data.
Screw holes
6
Two screw holes for mounting the
device on a wall or ceiling.
9