Astro Pneumatic Tool 1833 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Pengemudi Dampak Astro Pneumatic Tool 1833. Astro Pneumatic Tool 1833 4 halaman. 3/8" nano flex-head angle impact wrench - 400ft/lb

Halaman Cetak

Model:

1833

MAINTENANCE INSTRUCTION

1.) LUBRICATION:

Before connection of the hose, apply 4 to 5 drops

of a good quality air tool oil at the air inlet.

After 3 to 4 hours of operation, oiling may be

necessary again.

2.) TIGHTNESS OF PARTS:

Regularly check whether all connecting parts are

fastened securely. Follow this procedure daily

before beginning work.

3.) STORAGE:

Avoid storing the tool in a location subject to high

humidity. If the tool is left unused, the residual

moisture inside the tool can cause rust. Before

storing and after operation, oil the tool at the air

inlet with a good quality air tool oil and run it for

a short period.

4.) DISPOSAL:

Follow national legislation of waste disposal.

5.) ORDERING SERVICE PART:

For further operational and handling information

or for replacement of parts and components,

contact the sales agent from where you purchased

the tool, or the service division of our company,

phone number 800-221-9705.

* When ordering parts and components, give each

part number, name, and quantities.

Users of this tool should review the chemical

composition of the work surface and any products

used in conjunction with this tool for any such

chemicals prior to engaging in any activity that creates

dust and/or microscopic particles.

Users should obtain the Material Safety Data

Sheets for all identified chemicals, either from the

manufacturer or their employer, and proceed to study,

understand, and follow all instructions and warnings

for exposure to such chemicals.

Some examples of these chemicals are: lead from

lead based paints; crystalline silica from bricks,

cement and other masonry products; and arsenic and

chromium from chemically treated lumber. A listing of

the chemicals can be obtained at

www.oehha.ca.gov under Propoisition 65.

In order to reduce their exposure to such chemicals,

users should always:

- work in well-ventilated areas.

- wear appropriate safety equipment and clothes that

are specifically designed to filter out microscopic

particles.

Product Type:

3/8" NANO FLEX-HEAD ANGLE

IMPACT WRENCH - 400FT/LB

1. The tool shall not be used in potentially explosive

atmospheres.

2. Disconnect the air hose before changing or adjusting

any inserted tools.

3. Before using tool, please confirm all couplings and

plugs are fixed securely. An air hose that is under

pressure may lash out when disconnected and could

lead to serious injuries.

4. Prevent loose clothes, long hair or any other personal

accessories from coming close to moving parts to

reduce the risk of being caught, trapped or drawn into

the rotating spindle.

5. Excessive high air pressure that exceeds the maxi-

mum pressure may cause injuries to user.

6. Exposure to strong vibration for extended time may

cause harm to operator.

7. Be aware of the rotation direction before starting the

tool to reduce hazardous situations due to unexpected

rotation direction.

8. WATCH YOUR STEP! Leaving excess hose unattend-

ed near working area or walk path could result in

injury or death.

9. Wearing eye/face protection could reduce the danger

to person from high speed splinters being emitted

from the tool or work surface.

10. Wearing correct breathing protection will help avoid

inhaling dust or debris from work process that can be

harmful to your health.

11. High sound levels can cause permanent hearing loss.

Use hearing protection while operating tool.

12. Due to the material being processed, there may be a

risk of explosion or fire. Be aware of work surface

dangers prior to beginning work.

13. There is a risk of being cut due to high speed rotation.

Do not touch high speed rotating disc.

14. This power tool is not insulated. If contact is made with

an electric current, injury may occur.

15. Dust created by sanding, sawing, grinding, drilling and

other related activities may expose the user to dust

and/or microscopic particles that may contain chemi-

cals known to the State of California to cause cancer,

birth defects or other reproductive harm.

Page 2

WARNING