ASTRO-PHYSICS GTOCP1 Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol ASTRO-PHYSICS GTOCP1. ASTRO-PHYSICS GTOCP1 2 halaman. Control box
Halaman CetakRemoval of The GTOCP1 Control Box
11
11
12
12
13 14
13
14
15
15
7. Diagram 10 shows the electronics
separated from its housing.
10
10
900GTO Mounts
8. The control box housing is held to the
900GTO mount with 3 socket head flat
screws. Use a 3/32" hex key to remove
these screws and remove the housing
from the plate holding it to the mount.
This is shown in diagrams 11 and 12.
1200GTO Mounts
9. The control box housing is held to the
1200GTO mount with 4 socket head flat
screws. Use a 3/32" hex key to remove
these screws and remove the housing
from the plate holding it to the mount.
This is shown in diagrams 13, 14 and 15.
10. After removing the control box please
remount the electronics into the box and
refasten the screws. This will allow for
easy storage or shipment back to
Astro-Physics.
You may want to screw the flat head
screws back into the holes they came
from in the plate attached to the mount
for safe keeping.
Page 2