AstroGadget FocusDream Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol AstroGadget FocusDream. AstroGadget FocusDream 9 halaman. Usb ascom control unit for electrical focuser

Halaman Cetak

1. Included in unit

1. FocusDream control unit.

2. USB cable.

3. CD ROM with software and user manual FocusDream.

2. GETTING STARTED (for example, modernization of electric focuser Sky-Watcher)

1. Connect the control unit and the engine FocusDream electric focuser regular cable that

comes with the focuser Sky-Watcher.

2. Connect the control unit FocusDream to the computer's USB port cable that comes with the

modernization of the focuser. At the same time on the installation of new equipment a request

to specify the path to the driver on the CD c software: "CD drive": \ driverVirtComPort \ "...".

After you install the equipment manager will be a new device - Virtual Communications Port

(COMx). The device is ready to go!

3. FOCUS UTILTY FocusDream Control panel.

1. Utility FocusDream Control panel is located on the on the CD c software: "CD drive": \

FocusDream Control panel \ FocusDream Control panel.exe

2. When you run the COM port selection in the drop-down menu, select the port

corresponding to the number Virtual Communications Port (COMx) in Device Manager. Use

the "Connect / Disconnect" Link utility FocusDream Control panel with focuser.

3. The utility supports two control modes focuser: intermittent and continuous.

Intermittent focuser control interface virtual buttons

'+ "Or" - "located in a working window utility FocusDream Control panel. One click moves the

focuser by the amount specified in the

"Incremental".

IMPORTANT! Emergency stop Electrical focuser by pressing the button STOP!