Asus 90MB11H0-M0EAY0 Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Motherboard Asus 90MB11H0-M0EAY0. Asus 90MB11H0-M0EAY0 35 halaman.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system

reboot without turning off the system power.

•

Chassis intrusion header (2-pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.

USB 2.0 connectors (10-1 pin USB1112, USB1314)

Connect a USB module cable to any of these

connectors, then install the module to a slot opening at

the back of the system chassis. These USB connectors

comply with USB 2.0 specifications and supports up to

480Mbps connection speed.

TPM connector (14-1 pin TPM)

This connector supports a Trusted Platform Module

(TPM) system, which can securely store keys, digital

certificates, passwords, and data. A TPM system

also helps enhance network security, protects digital

identities, and ensures platform integrity.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the

serial port module cable to this connector, then install

the module to a slot opening at the back of the system

chassis.

Mono out header (2-pin MONO_OUT)

This internal mono out header allows connection to an

internal, low power speaker for basic system sound

capability. The subsystem is capable of driving a

speaker load of 4 Ohms at 2 Watts (rms).

Chapter 1: Product introduction

USB1112

USB1314

PIN 1

TPM

PIN 1

COM

PIN 1

MONO_OUT

PIN 1

1-6