BATTERY LINK DCDC20S Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Pengisi Daya Baterai BATTERY LINK DCDC20S. BATTERY LINK DCDC20S 12 halaman. Dc to dc dual battery charger

Halaman Cetak
BATTERY LINK DCDC20S Manual

Operating the Charger

1、DC BATTERY
Once correctly installed the Battery Link DC-DC charger is a simple set and forget dual battery switch.
•
Start the vehicle and let it idle.
• The charger will now recognize that there is charge being applied to the main starting battery.
Once the main starting battery has reached 12.5 volts the charger will begin to charge the auxiliary
•
battery.
• The initial default setting is for lead acid batteries.
•
the battery type selector button on the front of the charger.
• Once selected, the charger will remain on this battery type until it is changed.
•
2、Solar Input
Once correctly installed the Battery Link DC-DC charger is a simple set and forget dual battery switch.
Once connect the input terminal with solar panels positive and negative, the charger will transfer to
•
solar charge mode.
•
(14.7 volt of full charged), the second time to press button converse to calcium charging mode(15.6 volt
of full charged), the third time to press button back to AGM/Gel charging mode, followed by recycling.
•
NOTE:
DC Battery input has the rst priority if solar input also produce electricity and it will shut o automatically.
•
Yellow
Solar Input
Red LED indicates battery is "Solar Charge".