BATTERY LINK MCU025 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Pengisi Daya Baterai BATTERY LINK MCU025. BATTERY LINK MCU025 9 halaman.
Juga untuk BATTERY LINK MCU025: Manual (8 halaman)

Halaman Cetak
BATTERY LINK MCU025 Manual

Operating the Charger

Connecting the charger to a battery in a vehicle:
Ensure the ignition and all of the accessories in the vehicle are switched off. This will maxi-
mize the charge your battery receives. It will also minimize any chance of damage occurring
to the vehicles on-board electronics.
1. Inspect the electrolyte levels in the battery and top up if required. This step does not apply
to maintenance-free batteries.
2. Connect the red positive (+) lead of the battery charger to the positive (+) post of the
battery.
3. Connect the black negative (-) lead of the battery charger to negative (-) post of the
battery.
4. Plug the battery charger into an AC outlet then switch on mains power to activate the
charger.
5. When "Power" LED light is illuminated this indicates the battery charger is active and
ready to use.
FULLY
CHARGING POWER
CHARGED
FULLY
CHARGING POWER
CHARGED
FULLY
CHARGING POWER
CHARGED