Air King 99533 Panduan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kipas angin Air King 99533. Air King 99533 8 halaman. 24” & 30” quiet design oscillating pedestal fan
Halaman Cetak
Operating Instructions & Parts Manual
OPeRAtInG InStRuCtIOnS
1. TO OPERATE: Plug cord into a
grounded 120V, 60 Hz outlet.
Select desired operating speed
with pull cord on the rear of the
motor:
First pull: High
Second pull: Medium
Third pull: Low
Fourth pull: OFF
n O t e : t H I S FA n I S V e RY
HeAVY.
Failure to securely hold onto
head assembly while adjusting
head angle could result in per-
sonal injury.
2. TO ADJUST HEAD ANGLE: While
holding head firmly, loosen knob
under motor (turn counter-
clockwise). Tilt head to desired
position FIRMLY retighten knob
under motor.
FOR OSCILLATING MODELS:
3. OSCILLATION: Push down oscil-
lation knob on motor housing to
make fan head move from side to
side.
NOTE FOR OSCILLATING MOD-
ELS: FAN IS SHIPPED WITH 90º
OSCILLATION ANGLE. FOR 45º
OSCILLATION ANGLE, CONNECT
THE OSCILLATION LINK TO THE
INNERMOST HOLE IN THE CAM
GEAR. (Inset A)
New 5/11
3.
1.
2.
90˚
45˚
Cam Gear
(Inset A)
4
99533/99532
MAIntenAnCe
WARNING: ALWAYS UNPLUG THE
CORD BEFORE MOVING OR
SERVICING.
WARNING: DO NOT IMMERSE FAN
IN WATER!
CLEANING: Use a soft cloth and
mild soap solution such as liquid
dish washing detergent. Dry all
parts completely before reconnect-
ing to power supply.
CLEANING: Use a soft cloth and
mild soap solution such as liquid
dish washing detergent. Dry all
parts completely before reconnect-
ing to power supply.
SERVICING: All other servicing, with
the exception of general user main-
tenance, should be performed by an
authorized service representative.
LUBRICATION: Precision motor
bearings are sealed at the factory
for life and do not require further
lubrication.
STORAGE: Store the Fan, with these
instructions, in a clean and dry
place.
PREVENTATIVE MAINTENANCE:
Occasionally check oscillation link
bolts (2) and tighten as necessary.
5085460