Asus EXR8ASVP228QG Panduan Pengguna - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Asus EXR8ASVP228QG. Asus EXR8ASVP228QG 30 halaman.
Halaman Cetak
3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and
there is no screen image
Screen image is too light or dark
Screen image bounces or a wave
pattern is present in the image
Screen image has color defects
(white does not look white)
No sound or sound is low (only
VP228H/VP228QG/VP228HE/
VP228T/VP228TE)
3-14
Possible Solution
• Press the
button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select "ON" to turn on power LED.
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
• Adjust the Contrast and Brightness settings via
OSD.
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
• Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
Chapter 3: General Instruction