Baumer PMG10P Panduan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Konverter Media Baumer PMG10P. Baumer PMG10P 40 halaman. Absolute encoder
Juga untuk Baumer PMG10P: Petunjuk Pemasangan dan Pengoperasian (32 halaman), Petunjuk Pemasangan dan Pengoperasian (36 halaman), Petunjuk Pemasangan dan Pengoperasian (32 halaman), Panduan Pengoperasian (44 halaman), Panduan Pengoperasian (44 halaman), Panduan Pengoperasian (40 halaman), Panduan Pengoperasian (40 halaman), Panduan Pengoperasian (36 halaman)

Baumer PMG10P Panduan Pengoperasian
5
|
Installation
5.2

Mounting with base B3

5.2.1

Attach coupling onto encoder shaft

INFO
Baumer recommends to use the Baumer Hübner K 35 spring disc coupling to connect the rotary
encoder and the drive shaft of the following device. The Baumer Hübner K 35 spring disc cou-
pling can be pushed onto the drive shaft without axial pressure.
1
Ill. 5: Attach coupling onto encoder shaft
1
Coupling
Tools
2.5 mm
n
Instruction:
a) Mount the coupling on the encoder shaft , observe the related mounting instructions.
b) When using the K 35 spring washer of Baumer Hübner, consider the maximum permitted
tolerances for mounting errors.
c) Fasten the coupling at the specified torque (K 35: Mt = 1 Nm (plastic side), Mt = 1.3 ± 10%
Nm (metal side)). Observe the remarks in the spring washer assembly instructions.
Also see about this
2 Maximum permitted tolerances for mounting errors when using the Baumer Hübner K 35
spring washer [} 17]
14
Operating Manual
Baumer Hübner
PMG10 & PMG10P EtherNet/IP | V1