Asus AP130-D5 Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Server Asus AP130-D5. Asus AP130-D5 40 halaman. Pentium 4 pedestal server

Install the HDD

1. Insert the HDD into the cage

(label side up) until the holes

on the HDD align with the

holes on the cage.

2. Secure the HDD with four

screws (two on each side).

3. Replace the cage into the

chassis.

1. Connect one end of the IDE

cable to the IDE connector at

the back of the drive, matching

the red stripe on the cable with

Pin 1 on the IDE connector.

2. Connect a power cable (plug

marked P5) to the power

connector at the back of the

drive.

3. Connect the other end of the

IDE cable to the primary IDE

connector (blue connector) on

the motherboard.

Red Stripe to Pin 1

IDE Cable

Power Cable (P5)

To primary IDE connector

on the motherboard

Chapter 2: Hardware Setup