DPA 3529-A Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikrofon DPA 3529-A. DPA 3529-A 13 halaman. Omnidirectional microphones
Juga untuk DPA 3529-A: Panduan Pengguna (11 halaman)
Halaman Cetak
3529-A AND 3530-A KITS INCLUDE
2 x 4006
Omnidirectional Microphone, P48, matched (3530-A)
or
2 x 4003
Omnidirectional Microphone, 130 V, matched (3529-A)
UA0836
Stereo Boom with Holders
2 x DD0251
Free-field Grid, Silver
2 x DD0297
Diffuse-field Grid, Black
2 x UA0777
Nose Cone
2 x UA0638
Windscreen for 4003/4006/4006-TL
2 x L30B
Acoustic Pressure Equaliser, 30 mm (1.18 in) Ball
2 x L40B
Acoustic Pressure Equaliser, 40 mm (1.57 in) Ball
2 x L50B
Acoustic Pressure Equaliser, 50 mm (1.97 in) Ball
2 x DAO0130
Microphone Cable for 4003/04/12/16, 5 m (16.4 ft)
HMA5000
Hi-Voltage Microphone Amplifier, 2 channel (3529-A)
18
CARE OF MICROPHONE
It is important to bear in mind the following points with regard to
mounting, microphone care and the use of accessories:
The microphone cartridge is tightly secured to the main body housing,
and no attempt should be made to remove it. If a replacement car-
tridge is required, contact your local DPA Microphones representative.
Types 4003, 4006 and 4006-TL are supplied with an additional
Diffuse-field Grid DD0297 (see "Technical Description" and "Full
Specifications"). On delivery, the normal protection grid is screwed on
to the cartridge housing and normal finger torque is required to
remove it. Do not try to unscrew or tighten the protection grids with
any kind of tool as both surface and thread might be damaged.
Use of windscreen is recommended when microphones are used in
dirty or dusty environments.
When not in use, the microphone should be disconnected and kept in
the case supplied.
19