Amprobe WT-30 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Amprobe WT-30. Amprobe WT-30 17 halaman. Salinity meter

"E03"

Salt value is over the range limit (70.0ppt) or

meter is damaged.

• Put the meter in standard solution. If E03

still appears, send back for repair.

"E04"

Caused by temp. error

• Refer to error code of temperature. After

solving the error of temp., E04 will disappear.

Parameter: Temperature

"E01"

Temperature circuit is damaged

• Send back for repair

"E02"

Temp value is lower than range limit (0°C) or

temp. circuit is damaged

• Put the meter in room temp. for 5 mins. If

E02 still appears, send back for repair.

"E03"

Temp value is higher than range limit (50°C)

or temperature circuit is damaged

• Put the meter in room temp. for 5 mins. If

E02 still appears, send back for repair

Figer 1.

Figer 2.

Figer 3.