AMQ ACTIV-Pro Panduan Pengguna & Pemecahan Masalah - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna & Pemecahan Masalah untuk Perabotan Dalam Ruangan AMQ ACTIV-Pro. AMQ ACTIV-Pro 12 halaman. Sit-to-stand table
Juga untuk AMQ ACTIV-Pro: Panduan Instalasi (12 halaman), Panduan Pengguna (7 halaman), Panduan Perakitan (16 halaman)
Halaman Cetak
Handset Lock
1 .
Press and hold the "M" button (about 5 seconds) until the LED display shows "LOC" .
2 . Release the button . The handset is now locked and no buttons will work .
Handset Unlock
1 .
Press and hold the "M" button (about 5 seconds) until the LED display switches from "LOC" to the
height number .
2 . Release the button . The handset is now unlocked and fully functional .
Choosing one-touch or constant-touch for memory preset buttons
ACTIV allows you to choose either one-touch (press and release) or constant-touch (hold until desired
height is reached, allowing you to release early if a different height is preferred) for controlling your memory
presets .
1 .
Press the DOWN button on the Handset until the base reaches its lowest position . Release .
2 .
Press and hold the DOWN button again until the LED display reads "ASR" .
3 .
Press and hold the "1" button until it switches to either:
10 . 1 = One-Touch
10 .2 = Constant-Touch
4 .
"ASR" will show on the display .
5 .
Finish the reset process by pressing and holding the DOWN button until the desk lowers a little bit
more, slightly rises and stops . Release the button . The new setting is saved and your desk is now ready
to use .
Setting the LED Retracted Height
Press the DOWN button on the Handset until the base reaches its lowest position . Measure the distance
from floor to the top surface of the desktop . If the number on the LED display does NOT match your
measurement, follow these steps:
1 .
Press and hold the DOWN button until the LED display reads "ASR" . Press and hold the "M" button
(about 5 seconds) until the LED displays the flashing height . (If the display returns to "ASR" before the
next step is taken, repeat this step .) Use the UP/DOWN buttons to change the value of the starting
height so that it matches your measurement . Wait about 5 seconds and the display will return to "ASR . "
2 . Finish the reset process by pressing and holding the DOWN button again until the desk lowers a little bit
more, slightly rises and stops . Release the button . The new starting height value is saved and your desk
is now ready to use .
Note:
LED display has a + 0 . 1 tolerance .
Setting a Custom Maximum Height
1 .
Use the UP button to move the base to the desired maximum-height position .
2 . Press the "M" button and release . The LED display will show "S- '' .
3 . Then press the "UP" button and release .
4 . Then press and hold the "M" button until the LED display will show "999" . The new maximum height is
now set .
Activ-Pro User / Troubleshooting Guide | 7
amqsolutions.com