AMS TMD2636 EVM Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Unit Kontrol AMS TMD2636 EVM. AMS TMD2636 EVM 9 halaman. Miniature proximity sensor module
Juga untuk AMS TMD2636 EVM: Panduan Pengguna (17 halaman)

Halaman Cetak

Connect Hardware

Plug the TMD2636 daughterboard into the controller board (Figure 1). Always use ESD procedures

when handling the EVM.

Using the enclosed USB cable, plug the micro-B connector into the EVM module. Using the other end

of the cable, plug the USB A-connector into a USB port on the computer.

When the USB cable is connected, the green LED should light on power up to indicate that power is

being received via the USB interface, and the controller board processor is running. If the green LED

does not light, check the USB cable connections; unplug the USB cable and try again. If the green

LED still does not light, check the PC for USB error messages.

Quick Start Guide • PUBLIC

QG001003 • v1-00 • 2021-Jan-18

Document Feedback

TMD2636 ● TMD2636 EVM

Connect Hardware

│ 7