AMS AS6200-WL_EK_A Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor AMS AS6200-WL_EK_A. AMS AS6200-WL_EK_A 13 halaman. Eval kit adapter board
Halaman CetakAS6200 Adapter Board
3.2 AS6200/C Configuration
With the address selector, it is possible to choose the I²C address of the device. The included
jumper is an easy way of setting the I²C address of the sensor. The address selector must not be
left open.
3.3
Power Supply and Connections
The PCB has to be connected to an external microcontroller. P1 is populated with a 1x5 pin header
and is required for power supply as well as I²C communication. In addition to that it can be used to
monitor the interrupt status via pin 5 (IRQ).
ams Eval Kit Manual
[v1-01] 2017-Dec-01
Address Selector
GND
VDD
Table 3: I²C address
Figure 3: I²C connection
Device Address
100 1000
0x48
100 1001
0x49
Document Feedback
Page 5