AMSOIL BMK-30 Petunjuk Pemasangan dan Servis - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Servis untuk Peralatan Laboratorium AMSOIL BMK-30. AMSOIL BMK-30 6 halaman.
Halaman Cetak
Diagram B
3
2
⁄
8
Diagram D
Minimum Bend
Radius
(Actual size)
Diagram E
SEALANT
AREA
NO SEALANT
ON FIRST 1-2 THREADS
If Teflon tape is used, it should be wrapped no
Note:
1
more than 1
⁄
to 2 turns in a clockwise direction
2
when viewed from the thread end.
Caution: More than two turns of tape may cause distor-
tion or cracking of the port. Never back off
(loosen) pipe threaded connectors to achieve
alignment.
7
1
⁄
1
16
7
2
⁄
8
1
1
⁄
(1.5)
2
13
⁄
I.D. Hose BP-188
32
7
⁄
16
Mounting Angle Diagram G
(Recommendations are the same right to left and front to back)
Mounting angle above horizontal is not recommended
180°
160°
ACCEPTABLE
ANGLE
130°
Diagram F
1. Place socket in vice and screw in hose
counter-clockwise until hose bottoms. Back
1
hose out
⁄
turn.
2
2. Oil inside of hose and nipple threads liberally
with oil. Do not oil hose cover.
3. Screw nipple assembly into socket using
wrench on nipple hex until nipple hex
shoulders against socket.
PREFERRED MOUNTING ANGLE
HORIZONTAL
0°
20°
ACCEPTABLE
ANGLE
50°