Electrolux 727574 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Electrolux 727574. Electrolux 727574 18 halaman. Vertical refrigerators
Juga untuk Electrolux 727574: Manual (34 halaman)

Halaman Cetak

In case of a significant anomaly (e.g. short circuits, wires coming out of the terminal block, motor breakdowns, worn electrical cable

sheathing, etc.) the operator for normal appliance use must:

• immediately deactivate the appliance.

A.15 Appliance maintenance

• The inspection and maintenance intervals depend on the actual appliance operating conditions and ambient conditions

(presence of dust, damp, etc.), therefore precise time intervals cannot be given. In any case, careful and periodical appliance

maintenance is advisable in order to minimise service interruptions.

• It is advisable to stipulate a preventive and scheduled maintenance contract with the Customer Care Service.

• Put the appliance in safe conditions before starting any maintenance operation.

• To guarantee appliance efficiency and correct operation, periodical maintenance must be carried out according to the

instructions given in the manual.

A.16 Maintenance intervals

It is advisable to carry out the checks with the frequency given in the following table:

Maintenance, inspections, checks and

cleaning

Ordinary cleaning

• general cleaning of appliance and surrounding

area

Mechanical protection devices

• check their condition and for any deformation,

loosening or removed parts

Door frame and Gasket

• Check the integrity status of the door frame

and door gasket.

Check the cleanliness of the door frame and

door gasket.

Replace in case broken.

Control

• check the mechanical parts, for cracks or

deformations, tightening of screws: check the

readability and condition of words, stickers

and symbols and restore if necessary

Appliance structure

• tightening of main bolts (screws, fixing

systems, etc.) of appliance

Safety signs

• check the readability and condition of safety

signs

Electrical control panel

• check the electrical components installed

inside the electrical control panel. Check the

wiring between the electrical panel and

appliance parts

Electrical connection cable

• check the connection cable (replace if

necessary)

General appliance overhaul

• check all components, electrical equipment,

corrosion, pipes...

The appliance is designed and built for a duration of about 10 years. After this period of time (from commissioning) the appliance must undergo a general

inspection and overhaul.

APPLIANCE AND MANUFACTURER'S IDENTIFICATION DATA

The data plate gives the product identification and technical

data.

Frequency

• Daily

• Yearly

• Monthly

• Yearly

Every 10 years

Responsability

• Operator

• Service