Bosch CMG633B.1B Buku Petunjuk - Halaman 26

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Oven Bosch CMG633B.1B. Bosch CMG633B.1B 48 halaman. Compact oven with microwave function

Halaman Cetak

Trouble shooting

If a fault occurs, there is often a simple explanation.

T r o u b l e s h o o t i n g

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

Fault

The appliance does not work.

"Sprache Deutsch" appears on the

display.

The time does not appear when the

appliance is switched off.

The appliance does not heat up; the

symbol lights up on the display.

The rotary selector has fallen out of

the support in the control panel.

The rotary selector can no longer be

turned easily.

--------

Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Error messages on the display

When an error message appears on the display with "D"

or "E", e.g. D0111 or E0111, switch the appliance off

and on again using the

If it was a one-off error, the display goes out. If the error

message appears again, call the after-sales service and

quote the exact error message.

Maximum operating time

If you do not change the settings on your appliance for

several hours, the appliance stops heating up

automatically. This prevents unwanted continuous

operation.

The respective settings for the operating mode govern

when the maximum operating time is reached.

Possible cause

Faulty fuse.

Power cut

Basic setting is changed.

Demo mode is activated in the

basic settings.

The rotary selector has been

accidentally disengaged.

There is dirt under the rotary

selector.

On/Off button.

Rectifying faults yourself

You can often easily rectify technical faults on the

appliance yourself.

If a dish does not turn out exactly as you wanted, you

can find many tips and instructions for preparation at

the end of the operating manual.

our cooking studio" on page 28

Notes/remedy

Check the circuit breaker in the fuse box.

Check whether the kitchen light or other kitchen appliances are working.

Reset the language and the time.

Change the basic setting for the clock display.

Briefly disconnect the appliance from the mains (switch off the circuit breaker

in the fuse box) and then deactivate demo mode in the basic settings within 3

minutes.

The rotary selector can be removed. Simply place the rotary selector back in

its support in the control panel and push it in so that it engages and can be

turned as usual.

The rotary selector can be removed. To disengage the rotary selector, simply

remove it from the support. Alternatively, press on the outer edge of the rotary

selector so that it tips and can be picked up easily.

Carefully clean the rotary selector and its support on the appliance using a

cloth and soapy water. Dry with a soft cloth. Do not use any sharp or abrasive

materials. Do not soak or clean in the dishwasher.

Do not remove the rotary selector too often so that the support remains sta-

ble.

Maximum operating time reached

A note appears on the display confirming that the

maximum operating time has been reached.

To continue operation, touch any field or turn the rotary

selector.

Switch the appliance off using the

you do not need to use it.

Set a cooking time so that the appliance does not

Tip:

switch off when you do not want it to, e.g. with an

extremely long preparation time. The appliance heats

up until the set cooking time has elapsed.

Cooking compartment bulbs

To light the interior of your cooking compartment, your

appliance has one or more long-life LED bulbs.

However, if ever an LED bulb or the bulb's glass cover

is defective, call the after-sales service. The lamp cover

must not be removed.

"Tested for you in

On/Off button if