Alemlube G10040N Panduan Teknis Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Teknis Pemilik untuk Peralatan Alemlube G10040N. Alemlube G10040N 7 halaman. 18v lithium-ion cordless grease gun el-series

Halaman Cetak

TROUBLE SHOOTING

Condition

Motor fails to run

Faulty wiring to motor

Grease gun fails to

dispense grease

Loss of prime

Grease gun continues

to lose prime

Ball check valve kit is

not functioning

Follower may be binding in

grease barrel assembly

Battery fails to take a charge

NSW

TEL: (02) 9939 0711

FAX: (02) 9939 0411

Visit our website at

Possible Cause

Battery needs charging

Grease barrel assembly is out of grease

Air may be trapped in several locations

Charger may not have power

Battery may be bad

QLD/PNG

VIC/TAS

TEL: (07) 3204 9166

TEL: (03) 8787 8288

FAX: (07) 3204 1224

FAX: (03) 8787 8266

www.alemlube.com.au

Corrective Action

Recharge battery

Remove battery, disassemble handle and check

wiring for loose connection.

Check that grease barrel assembly has grease

Repeat priming operation

Empty grease barrel in container after bulk filling

Assemble, refill and repeat priming instructions

Remove Item 38;39;40, clean and inspect ball seat area

Step1. Replace grease barrel assembly.

Step 2. Disassemble grease barrel assembly and clean

Be sure that follower has properly entered the

grease cartridge

Or verify that the follower is not caught on the rim

of the grease cartridge

Check that receptacle has power

Replace battery

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

Email - [email protected]

TEL: (09) 447 1007

FAX: (09) 447 1008