Alen C425 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pendingin Udara Alen C425. Alen C425 14 halaman. Alen c425: user guide

OPERATING INSTRUCTING FOR THE AIR CONDITIONER

Before Starting This Unit

1) Select a suitable location, make sure you have easy access to an electrical outlet.

2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.4 &

Fig.4a

NOTE: Step 2 is required only while using the

3) Plug the unit into a 220-240V~50Hz/ or 115V~ 60Hz (Refer to the nameplate located on

the right side of the unit.) grounded electrical outlet. DO NOT USE A REGULAR EXTENSION

CORD. If it is necessary to use an extension cord with this unit, use an approved air conditioner

extension cord only.

4) Insert the power cord fixing strap into the hole in the back of the unit, and bundle up the excess

cord.

5) Make sure the Water tank is correctly positioned inside the cabinet otherwise the unit will not

operate.

6) Press the

on/off

Electrical Requirement

1. All wiring must comply with local and national electrical codes and be installed by a qualified

electrician. If you have any questions regarding the following instructions, contact a qualified

electrician.

2. Check available power supply and resolve any wiring problems BEFORE installation and

operation of this unit.

3. For your safety and protection, this unit is grounded through the power cord plug when

plugged into a matching wall outlet. If you are not sure whether the wall outlets in your

home are properly grounded, please consult a qualified electrician.

4. The manufacturers nameplate is located on the right side panel of the unit and contains

electrical and other technical data specific to this unit.

5. To avoid the possibility of personal injury, always disconnect the power supply to the unit

before installing and/or servicing.

Fig.4

cooling mode .

button to turn on the unit.

Fig.4a